Product Description

Seeing is believing. Upside down tomato plants? That's the Topsy Turvey. The 3-Ply UV-resistant gro-bag holds enough potting mix for incredibly dense root systems. The hanging system is made of stainless steel aviation cable and a 360 degree swivel attachment is included. How do you llike those tomatoes brother? ... Read more

Features

• PERFECT FOR PATIOS, DECK, PORCHES OR YARDS
• ELIMINATE SOIL PREPARATION AND HOLE DIGGING
• ELIMINATE CUT WORMS AND GROUND INSECTS
• ELIMINATE TYING TOMATOES AND STAKES OR CAGES
• THE EASIEST WAY EVER TO GROW TOMATOES AND MORE!

Product Description

mfg by: DELTA INTL MACHINERY CORP 12-1/2" PLANER 15 Amp Cutterhead-snipe control lock Quick change knife system Stock roller for passing stock quickly Use adjustable cutterhead to raise/lower columns TP400LS 12-1/2 PLANER W/LEGS ... Read more

Features

• Complete with a stand and extra set of reversible knives
• 15-amp motor for maximum power
• Advanced cutter head lock for superior snipe control
• Easy knife changing for perfect alignment each time
• Longer chrome in-feed and out-feed tables

Reviews (10)

Hindsight is 20/20
If I had prior experience with this piece of equipment, I would not have purchased it and instead would have considered and saved for either a Grizzly or Yorkcraft 15" induction motor powered planer. I have run masses of wood through this planer since I purchased it over a year ago and have a lot to say about it. I am going to (unfairly) review it as a permanent fixture in a woodworking shop, as this is the experience I have with it and I believe most folks purchase this unit for this purpose, even though I know it is intended by the manufacturer to be a portable, on-the-job unit.
Before purchasing this planer, consider the following:

Price:
The price of this unit is reasonable compared to similar manufacturer's products, but for an extra couple hundred bucks (or more), you could do substantially better.

Usage:
Are you going to use it occasionally, or will you need to plane more than 50 or 60 board feet of lumber a week? When I say 50 or 60 board feet, I mean 50 or 60 surface feet that comes in contact with the planer blades; i.e. 20 bft. of lumber run through the planer 3 times would equal 60 bft. planed. I would recommend no more stress than that on this machine if you want to use it for the long haul. I would also not recommend planing anything over 7 or 8 inches wide or longer than 10 feet - you will have power and/or stability problems.

Performance:
I'm not sure what the horsepower rating on this universal motor is, but it bogs down noticeably on regular cuts with any stock over 7 or 8 inches wide. The sharper the blades, of course, the less of a problem this is. With anything wider, I would recommend very, very shallow passes.
I have an issue with the belt drive that operates the cutter head. The nut that holds the flange keeps coming loose and I have to tighten it occasionally. There is no good way to lock the cutterhead to get good torque on the nut. Torquing too hard (which is not very difficult to do) results in the cutter head safety device suddenly disengaging. This loosening of the flange nut has shredded the belt (I have a new one waiting in the wings - a $16 replacement) and causes a grinding sound like the unit is going to fly apart at any time.
The other issue I have had with it is the cutter head locking mechanism that is intended to prevent snipe. The cutter head is raised or lowered by a threaded rod that has a handle that extends to the top of the unit. Spin it one way to raise, the other to lower. The cutter head lock tightens down to prevent the cutter head from moving up or down and minimize snipe somehow. I'm not sure exactly how this works. The other thing it does, incidentally, is keep the cutter head from vibrating the threaded rod and causing the cutter head to rise as the threaded raise/lower rod spins loose. I began to notice that after planing say, 8 or 9 boards, the thickness of the last board as it came out of the planer was greater than the thickness of the first board that went through. After checking it out, I noticed that even with the cutter head lock cranked down as hard as I could get it, I could still somewhat raise or lower the cutter head with the raise/lower handle. I disassembled the cutter head lock and saw that there are flat bars that run up and down that the lock clamps onto (2 on each side of the unit). I took some 100 grit sandpaper and roughed up the bars. Now I can't raise or lower the head with the lock cranked down - good.
The finish this planer leaves on the wood is respectable. With sharp blades, it is difficult to detect milling marks. There is some snipe, sometimes less, sometimes more. Supporting the end of the board level with the infeed and outfeed table minimizes snipe noticeably.
One other thing you should know about this planer, especially if you purchase the optional dust collection hood (anyone in their right mind would use a planer or jointer without dust collection must have made a hobby out of sweeping and breathing dust), is that this unit is LOUD. I mean VERY LOUD. Do not operate this machine without hearing protection. It is twice as loud as running the flat side of a board over a jointer. For some reason, it is significantly louder with the dust collector running.

Construction:
I am not very impressed with the construction of this machine. For the money, it's not bad. The main frame of the unit appears to be cast iron, but everything else is, unfortunately, either plastic or stamped steel, which includes the infeed and outfeed tables, the bearing surface that the lumber slides across, legs, handles, and other latches and mechanisms. This should be expected for this price point, but not suited for anyone more active than the weekend hobbyist.
The infeed and outfeed tables are short and feel (and look) rather flimsy. They do little to support anything over 3 feet in length. I use a portable roller stand on the outfeed side for long stock and support the end of the board on the infeed side by hand. The unit itself is quite light in comparison to the other machines in the shop, and I think that this is by design, as this unit is intended to be ported from job site to job site. As a result, the stand it came with is kind of unsteady as there is not enough weight to anchor all four feet to the ground. I have shimmed up one of the feet to prevent it from rocking. Vibration would seem to interfere with the cut quality, but I have not seen any evidence of this. The surface the machine leaves, as I said earlier, very good.

Other points:
Blade changing is easy. Undo some screws, pop out and replace or spin blade around (both sides are sharpened), pop back in, tighten, and go. No adjustments. The downside is, the blades are unsharpenable. Once both sides are dull, toss it out. I have attempted to sharpen the blades with one of those handheld deals that you slide back and forth across the blade, but this does nothing. They are not intended to be sharpened. The cost of replacements is probably what you would have to pay a sharpener for sharpenable blades, so this is not so big a deal.
The carrying handle doubles as a return roller, which means if you have to run a piece through the planer more than once, you can set it on top of the handle and roll it back ot the infeed side. Small feature, but I use it quite a bit for long stock.

Overall impression:
The machine is good for the occasional user, but if you are getting to the point where you are surfacing a great deal of rough lumber or working with heavy, long, or wide stock, you may want to consider a "real" planer, like a Yorkcraft YC15P ($800 + shipping) or Grizzly G0551 ($750 + shipping). If your budget won't allow it, look at the Dewalt 13" portable. It looks SOLID and I've heard a great many good things about this unit. I think it goes for around $500.

Quite useful
After usuing this product for just over a month, I can safely say that this was an excellent purchase. Setup was fairly simple, (The stand took the longest) and the planer was all adjusted properly. After a month of use, everything is still in excellent conditon, and its still running strong. Overall, another quality product from Delta. Highly reccomended for a small shop or the do-it-yourselfer.

Not too bad!!!
I've used this little planer for over 3 years now.I've ran dozens of different types of wood through it and really have not had a lick of trouble from the machine except that when trying to run the heavy, dense woods through, it sometimes requires a helping hand to push through.I've never had any problems with burning or snipe.Everything was aligned and adjusted out of the box, just unpack, plug in and go.If this machines dies tomorrow, I feel like I've gotten my money's worth from it.But, it's still going strong and is working as well as the day I brought it home.I would recommend it and I would buy it again after 3 years of regular use.I probably would rate this machine at 4 and a half stars, not 5 because of having to help with the infeed of heavier woods...not a big deal at all, just know about.

Delta 12-1/2 inch planer
I bought this planer to prepare maple and birch dimensioned lumber for the cabinets I am making for my kitchen remodel. The two primary uses are making the face frame pieces identical in thickness and drawer conponents being squared up as I am making all dovetail drawers.I am quite satisfied with the machines overall quality.The only criticism is the feeding of the material into the planer could be better.With fir, redwood, and pine the feed works perfect.However with the very hard maple and birch it tends to slip and needs a helping hand.I would recommend this product to any of my friends as a very good value.I also have reviews for a makita router, porter cable dovetail jig, Kreg pocket screw jig, and porter cable brad nailer. John Papetti

Well worth the small investment
This is my first planer - so I really have nothing to compare it with.Set up was very easy, most time consuming part was assembly of the stand - took about 20 minutes (even at my normal slow pace).The planer itself was a snap - just install the knobs and remove some packing material and you are ready to go.

I ran some maple and walnut throught it and was impressed with the finish, smooth as glass.I used a digital caliper to check thickness in several spots on the boards and they were pretty much dead on.The only thing I wish this machine had was some sort of "final cut" mechanism, so that you could preset your final dimension and not go any further with the plaining. I guess that is something you would expect on a much more expensive machine.I highly recommedn this planer to any home woodworker. ... Read more

Features

• Includes planer, 2 reversible carbide blades, and hex wrench
• 5.2 amp mtor for long life and deep cutting capacity
• 1/16" deep cutting capacity for increased performance
• Lock-on button for extended use
• 5/16" rabbeting depth capacity for edging

Reviews (2)

Value Substitute for Dewalt 680
I used my friends Dewalt 680 planer for a couple of jobs and liked its small size/weight and features. I didn't like its $150 price. So I went looking for and alternative and found this Black and Decker at Sears for $69.99 w/case and extra blades. It looks and performs like the Dewalt but at half the price and w/case, extra blades and wrench(uses dewalt blades), edge guide, dust bag, and vacumn attachment accessories.

The only differences I noticed is the rear shoe is a steel plate instead of cast. The front plate (adjustable for plane depth like Dewalt's) is cast aluminum like dewalt. Also, Dewalt has a
guard lever on its rear shoe that drops down to protect blade when setting planer down on its shoe after use. I actually found
this lever to be a pain when using the Dewalt because it would not always drop down when done with a plane, and it was in the way when you wanted to begin a plane run in the middle of a piece.

I was very impressed with this find and satisfied with this planer and its accessories so far.

great value - nice package!!!
after looking at the cost/benefits of the various planers out there, i realized that i really didn't need anything too fancy so i got this to get me through a trim job i'm in the middle of. all i can say is wow. for about $70 you get a very smooth running plane that comes equipped with a dust bag that actually works, a vacuum attachment, two extra reversable blades and a case. it comes with a rip fence but it seems pretty hokey and i wouldn't put too much faith in it. the adjustment knob has very nice detents in it that makes setting the depth a breeze. dont be scared away by the cheap price, this is a very good deal. ... Read more

Product Description

This compact three-tiered Stacking Planter lets you create surprisingly full vertical floral displays and kitchen herb gardens in small areas. Includes chain for hanging and bottom tray for free-standing use. Holds nine plants, three per tier. Imported. Buy two or more at $17.95 each. ... Read more

Product Description

Ivy-motif plant stand with six shelves. ... Read more

Features

• Six shelves
• Green metal
• Measures 22 1/4"x22 1/2"x38 1/2" high.

Product Description

A 4-tier metal plant stand, perfect for the atrium, garden, patio, or wherever you need a burst of color and brilliant greenery. Black finish. EXCLUSIVE means it was made for this particular collection. 32" X 8" X 24 3/4" high ... Read more

Features

• Size is 32" X 8" X 24 3/4" high
• A 4-tier metal plant stand, perfect of the atrium, garden, or patio
• Has black finish
• Can be used anywhere you need a burst of colors
• 4 different levels for plants to displayed

Product Description

24 oz Big T Tumbler has a double wall insulation to prevent condensation. Made in the USA. Manufacturer's Lifetime Guarantee. ... Read more

Amazon.com Review

A replica of a centuries-old Italian design, this urn displaysclassic egg-and-dart detailing on its rim and has a fluted bowl shapedlike an upside-down pumpkin. Though it looks like weathered stone, theurn actually is made of eco-friendly, recyclable polyethylene. Itweighs just a few pounds (90 percent less than clay), so it's easy tomove around, and it won't crack or chip. (It carries a 10-year warrantyagainst breaking and chipping.) Because the polyethylene includes UVstabilizers, the color won't fade in the sun. Nor will cold and rainharm the urn. It measures 17 inches high and 15 inches wide (outside)on a 9-1/2-inch-square base. At the top, it has an inside diameter of11-3/4 inches. It holds 14 quarts of soil and will accommodate a10-inch grower's pot. On the bottom are spots where the urn can bedrilled for drainage. --Fred Brack ... Read more

Features

• 10-year warranty against breaking and chipping
• Classic urn replicates centuries-old Italian design
• Made of eco-friendly, recyclable polyethylene resembling stone
• 90 percent lighter than clay; won't crack or chip
• 18 inches high, 15 inches wide (outside), 9-1/2-inch-square base

Reviews (1)

Garnders Gallery 17-tall Fluted Urn
Once placed in your garden this Fluted Urn over the years, will seam to fill and be twice the Gallery you would ever see. ... Read more

Features

• Made of plastic with a French cream color
• Classical styling, great gift for the garden enthusiast

Product Description

These are good for places where you want to be able to adjust the height and not have the marker hang on the plant. The 5 steel stakes adjust to a maximum 10" tall and the 10 copper labels are 3" across and 1" tall. ... Read more

Features

• Adjustable height plant markers
• 10 copper labels 3 inches across and 1 inch tall
• 5 steel stakes adjust to maximum 10 inches tall
• Made in England

Features

• These elegant window, porch and patio planter boxes are made of durable maintenance-free PVC plastic
• Far lighter than wood with an extra-deep design and internal Water-Minder insert to promote healthy plant growth
• The natural white PVC material will not turn yellow, fade or flake
• Can even be painted with any exterior paint to match home decor
• Includes brackets for easy mounting

Product Description

Topper fits 16 oz Tervis Tumblers, set includes : 4 lids, 4 straws, 4 straw caps. Dishwasher safe (top rack only). ... Read more

Product Description

Lightweight and durable, the countryside tub planter allows for deeper growth of your larger plants and trees. This planter features a natural matte finish with satin band and molded-in feet. Constructed of fade-resistant plastic and coded for recycling.Planter also has removable drainage plugs for better plant growth and a huge soil capacity of 35.4 dry quarts. Choose from two colors: black or white. Planter Dimensions: 18?L x 18?W x 15?H. ... Read more

Features

• Lightweight and durable, this planter allows for deeper growth of your larger plants
• Features a natural matte finish, with satin band and molded-in feet
• Constructed of fade-resistant plastic and coded for recycling
• Has a huge soil capacity of 35.4 dry quarts
• Planter Dimensions: 18?L x 18?W x 15?H

Product Description

After centuries of service as places to use for candelabra, the torchiere is now used for plants. This striking neoclassical design is finished in mahogany with antique brass lion's head adorments and feet. Some light assembly is required. ... Read more

Features

• Material: Wood/MDF/Veneers
• Finish: Antique Mahogany
• Accents: Antique Brass
• Care: Clean with dry cloth
• Assembly: Assembly required

Product Description

All right, we here at Windowbox.com dare you to find a more versatile window box holder. This flower box holder is expandable to accommodate boxes from 24 to 36 in length and up to 7.5 in width and adjustable to fit over most balcony or deck railings. Use the short end of the enclosed L-shaped clasp for 2 to 4 railings (wrought iron, aluminum, or vertical wood). Use the long end for 5 to 6 railings (2 x 4 to 2 x 6 railings). We recommend pairing this with our flower box window kits as a colorful combination to your garden railing. ... Read more

Features

• Versatile window box holder
• Expandable to accommodate boxes from 24 to 36 in length and up to 7.5 in width
• Adjustable to fit over most balcony or deck railings

Reviews (1)

The cutest pet bowl set ever!
I bought this set for my five month old Beagle who was outgrowing her first set of bowls. They are so beautiful. You can't tell by the picture, but if you read the description, you'll see that the water bowl, (the yellow one) is about two and a half times larger than the food bowl. This set is great. If they were ever to break, I would definitely buy another set. A great buy! ... Read more

Product Description

These deck protectors minimize water stains under potted plants on decks and patios. The patent pending radial design promotes air flow and maximizes water drainage in all directions. Think of it as a coaster for your flower pots! Made of a durable polymer designed to last for years and is available in two colors - clay and black. ... Read more

Product Description

The Great Pyramids have nothing on this hanging basket. Made of redwood and stained with Planter Guard, future archeologists may wonder how primitive man could build such a long-lasting work of art. Measures 14" x 14" x 7" with chain hanger. ... Read more

Features

• hanging basket
• Made of redwood and stained with Planter Guard
• long-lasting work of art
• chain hanger

Product Description

Ivy-motif plant stand with six shelves. Green metal. 22 1/4" X 22 1/2" X 38 1/2" high. ... Read more

Features

• Green metal plant stand
• Ivy-motif plant stand
• Six shelves
• 22 1/4" X 22 1/2" 38 1/2' high