Product Description

Covering 13,500 square feet, our Vibrasonic Molechaser® uses battery-power to generate powerful vibrations that irritate burrowing rodents. Its ease-of-use even allows battery replacement without removal from the ground. 16-1/4"Lx2"Wx2"H. Imported. Safe around humans and most pets. (Do not use around rodent pets or spiders.) ... Read more

Product Description

The BlackBoxTM Gopher TrapTraps Gophers effectively - easy to set and easy to use. No Poisons and no gases Safe and non-toxic. Durable, weather resistant construction. Easy to use and easy to set. Conventional wire claw and box traps can't match the BlackBoxTM gopher trap as an effective method of rodent control.To set the BlackBoxTM Trap:1. Always keep fingers out of trap action area. Hold trap as shown. Push spring down with both thumbs.2. Keeping pressure on spring with left thumb, maneuver bail wire into position with right thumb. Tilting trap can help trip wire move into position.3. Slowly relieve pressure on spring. Make sure that bail wire is engaged with trip wire before sliding thumbs away from trap. ... Read more

Product Description

VICTOR® Plunger Style Mole TrapEquipped with a safety pin to eliminate false firings.Spring is the best time to trap moles because newly-made surface tunnels are easy to spot. However, Moles can be trapped during any season except in very cold or dry weather.Instructions1. To identify active mole tunnels, flatten out all tunnels. Wait 24 hours. Tunnels that resurface are most likely the active tunnels. Set traps in these locations. 2. Make a depression in the roof of the main tunnel by pressing down with your thumb. 3. Center the trap on the tunnel, with the trap pan directly over the depression youve made with your thumb. 4. Push trap down until spears have bottomed out. 5. Preset spear holes by plunging spears up and down until they travel easily to the bottom on their own. 6. Before setting the trap, make sure the firing latch is OUTSIDE the pan. 7. Holding the trap frame in place, rapidly pull upward on T handle until the firing latch snaps over the pan. Ease T handle down until latch catches. 8. Trap is set. If necessary, apply slight downward force to ensure pan is fitting IN the thumb depression and is contacting the roof of the tunnel. 9. Trap has fired. Remove mole. ... Read more